I believe many people have met with the phenomenon that the road gate rod in the parking lot system is hit. In fact, no matter how good the material of the road gate rod is, it is afraid of being hit by vehicles. I hope you should control your speed when entering the parking lot to avoid the lack of guarantee for personnel safety and property safety due to too fast speed. No matter what it is, the most afraid thing is to be hit. As a manufacturer of parking lot system, we always encounter some customers who say that the road brake rod in their parking lot has been hit and want to buy the road brake rod. Moreover, this worry is always staged in major parking lots, which always makes people feel sorry. Therefore, we hope that when major car owners enter the parking lot, In order to ensure your personal safety and property safety, try to control your speed and pay attention to the surrounding environment. Take our parking lot system industry for example. The parking lot system seems to be an item placed in our parking lot, but it is most afraid of being hit. We have heard many stories about the collision of the road gate rod in the parking lot system before. The purpose is to remind all car owners to pay attention to the safety of public property in the parking lot while parking their cars. In order to prevent the road gate rod in the parking lot system from being hit, as the manufacturer of the parking lot system, we should first improve the anti-collision performance of the parking lot system, and improve it from the structural design, raw material selection and production; In addition, adjust the sensitivity of the gate lifting rod, because the gate response is not sensitive, resulting in the slow rise and fall speed of the gate rod, and the owner will easily hit the gate rod; Finally, the design of the entrance and exit of the parking lot is reasonable. The entrance and exit of some parking lots will be on a slope, resulting in some car owners unable to control the speed when entering the parking lot, resulting in the collision of the road gate rod. There are many factors causing the collision of the gate in the parking lot system. For everyone's safety and the safety of public property in the parking lot, the only thing we can do is to analyze the causes of the collision of the gate rod. I hope you can supervise and remind each other to usher in a harmonious and safe living environment for our parking lot.

The three roller gate has five controlled traffic working modes: two-way controlled traffic, left controlled traffic, right prohibited traffic, left prohibited traffic, right controlled traffic, left controlled traffic, right free traffic, left free traffic and right controlled traffic. First, let's take a look at the complete passage steps, as follows: take the left direction as an example, and the normal steps are: swiping the card; The three roller brake moves one step clockwise; Traffic signs change to green arrows; Personnel push the three roller brake through; Three roller brake automatically returns to zero position; The direction indicator changes to a red no go sign; Counter plus 1; Complete the passage. The right step is the same. OK, we understand the basic traffic steps. We can understand the following traffic working modes. The first is two-way controlled traffic. Take the left direction as an example. The normal steps are: swiping cards; The three roller brake moves one step clockwise; Traffic signs change to green arrows; Personnel push the three roller brake through; Three roller brake automatically returns to zero position; The direction indicator changes to a red no go sign; Counter plus 1; Done. The right step is the same. Special circumstances: 1. After swiping the card, if no one passes within the set time, the system will automatically reset and return to the gear. 2. Swipe the card in both directions at the same time. Whoever swipes the card first passes first. After passing, the other direction is allowed to release. Only one channel can be released at a time, and swiping the card at the same time cannot pass at the same time. The second type: controlled traffic in the left direction, forbidden traffic in the right direction and swiping card in the left direction; The three roller brake moves one step clockwise; Traffic signs change to green arrows; Personnel push the three roller brake through; Three roller brake automatically returns to zero position; The direction indicator changes to a red no go sign; Counter plus 1; Done. You can swipe your card several times, but the number of people passing each time is limited to 1, and it is forbidden to pass in the right direction. The third type: forbidden traffic on the left, controlled traffic on the right and swiping card on the right; The three roller brake moves one step clockwise; Traffic signs change to green arrows; Personnel push the three roller brake through; Three roller brake automatically returns to zero position; The direction indicator changes to a red no go sign; Counter plus 1; Done. You can swipe your card several times, but the number of people passing each time is limited to 1, and it is forbidden to pass in the left direction. The fourth type: controlled traffic in the left direction, free traffic in the right direction and card swiping in the left direction; The three roller brake moves one step clockwise; Traffic signs change to green arrows; Personnel push the three roller brake through; Three roller brake automatically returns to zero position; The direction indicator changes to a red no go sign; Counter plus 1; Done. The card can be swiped several times, but the number of people passing each time is limited to 1. When the card is not read in the left direction, the right direction arrow is always a green arrow under normal circumstances. The fifth type: free traffic in the left direction, controlled traffic in the right direction and card swiping in the right direction; The three roller brake moves one step clockwise; Traffic signs change to green arrows; Personnel push the three roller brake through; Three roller brake automatically returns to zero position; The direction indicator changes to a red no go sign; Counter plus 1; Done. The card can be swiped several times, but the number of people passing each time is limited to 1. When the card is not read in the right direction, the left direction passing arrow is always a green arrow under normal circumstances. The above are the five working modes of the three roller brake. Thank you for reading and hope to help you.

1. What do you call a parking ticket machine? The dispenser parking ticket machine is a parking ticket dispenser designed to write and print the lot number, machine number, parking ticket type, entrance number, and entrance time to the magnetic parking ticket as it is dispensed. The machine automatically dispenses the ticket as a car stops in its front. The ticket is also available using the button on the machine front panel. This machine offers the parking lot administration system when combined with the automatic fare adjustment machine, car barrier gate, entrance/exit monitor panel, various indicator lamps, and other equipment. This device, which can work offline and online, is microprocessor-based. With all the optional features available on the electronic circuit, all the required information can be provided to the customer thanks to the graphic display on the device. It can also give audible warnings and goes offline mode if there is a problem with the communication cable or the control computer. Thus, the continuous uninterrupted operation will be ensured. 2. How does a parking ticket machine work? Mode of Operation: Entry with Ticket: The arrival time of the incoming vehicle is taken from the computer as day-month-year-hour-minute-second. The device offers this information as a thermal bar code ticket to the customer. When the customer receives the ticket, this information is transmitted to the barrier to open it. Exit with Ticket: The customer who has been already given the thermal ticket, gives his ticket to the system operator when checking out. The operator also charges a fee by transferring the ticket which the reader has already read (bar code) before to the computer software. Subscription Entries: The incoming vehicles to the Loop Detector show the subscribed card (Mifare card) to the Mifare card reader on the ticket dispenser. After checking the login information of the card read by the card reader, access is granted according to the subscription. At this time, the relay output of the barrier actively allows visitors to pass by the vehicle. Subscription Exits: After The Mifare subscriber card which is given to the ticket dispenser system operator will be shown to the reader by the operator, an exit permit shall be given. In other words, check-in is recorded to the database on the computer. Communication Method: Ticket dispenser and computer communicate through RS-485. Mounting: Mounting can be done quickly and easily thanks to the mounting kit of the ticket dispenser. Related Search: Ticket car parking, Toll parking system, ticket dispenser, parking entrance and exit with ticket, parking fee system, subscription parking system, parking card, ticket dispenser and toll collection machine, park charging fee system, domestic production ticket dispenser machine. 3. How to use a car park ticket machine？ Tiger Wong has already been in the parking area for more than 20 years which has experience from ticket dispenser parking, then Mifare parking, ALPR parking, and data cloud parking change. From the opposite side of east land, most places are still using a ticket and mi-fare reading method for parking management, and all professional people might know the core is the management software to fulfill all functions. The hardware ticket dispenser machine was used as the control device which connect to the barrier, LED light, Dispenser, vehicle detector to generate all devices that could work while getting the command from the program from the management PC. In the whole system, the most important part is the parking panel which affords communication functions from hardware and software. It usually works by TCP/IP to talk with a computer, giving feedback to the computer to record or send a command. AT ENTRANCE (For Hourly User) Push Button and Take a Ticket. The vehicle comes close to the barrier gate and prepares to park. It will be allowed to take a ticket that the vehicle has already stopped on the Loop wire. And then the driver pushes the button and takes a ticket from Dispenser Housing. (For Monthly User) Paste Up the VIP Card On Dispenser machine. Take the card and paste up it on the dispenser box to raise the barrier gate. It must be waiting a minute that the barrier has already risen up. The vehicle begins to go through the barrier and entry parking. Keeping the card for the exit. The barrier does not close that the vehicle has to go through the barrier. The barrier will be closed itself after the vehicle goes over the closing loop detector completely. The vehicle enters the parking and stays in. PAYMENT The payment has three methods: Pay by cash at the exit. Pay by cash in the center Pay by automatic machine. AT EXIT After payment, the security opens the barrier. And the vehicle goes through the barrier gate. The barrier will close itself after the vehicle goes over the closing loop detector. The vehicle exit the parking. (For Monthly User) Paste Up the VIP Card On Dispenser machine. Take the card and paste up it on the dispenser box to raise the barrier gate. It must be waiting a minute that the barrier has already risen up. The vehicle begins to go through the barrier and entry parking. Keeping the card for the exit. Conclusion TigerWong parking is a professional custom parking equipment supplier that owns a factory. Check out our blogs for tips and tricks around parking lot equipment! Or contact us if you need help with sourcing parking lot ticket machines.

Nowadays, with the increasing number of vehicles, there are more and more problems such as difficult parking and charging. A series of problems such as congestion at entrances and exits and parking fees make property management very difficult, with high personnel cost and low work efficiency. Especially in the peak period of commuting, vehicles queue in and out and pay fees, which greatly affects the parking experience of car owners. So, what should we do to improve the parking experience of car owners? I. vehicle entrance and exit management license plate recognition system license plate recognition is a pattern recognition technology for automatic recognition of license plate number and license plate color by using vehicle dynamic video or static image. This technology is commonly used in parking lots and community entrances and exits, highway toll stations, highway checkpoints and urban traffic.

License plate recognition equipment is often installed at the entrance and exit of vehicles to record the license plate number and access time of vehicles, and combined with the control equipment of automatic gate hardware to realize the automatic management of vehicles. Applied to the parking lot, it can realize automatic time charging, automatically calculate the number of available parking spaces and give tips, realize the automatic management of parking charging, save manpower and improve efficiency. Applied to the intelligent community, it can automatically judge whether the incoming vehicles belong to the community, and realize automatic timing and charging for Non internal vehicles. Achieve no parking and no card collection, and effectively improve the access efficiency of vehicles. In order to solve the frequent congestion at the entrance and exit of the parking lot, tigerwongparking ticket machine system adopts advanced sensing and control technologies such as license plate number visual recognition technology, RFID intelligent identity recognition technology, high-resolution magnetic coding technology, frequency conversion speed regulation control technology, synchronous motor servo technology, etc., so as to realize the rapid identification of incoming and outgoing vehicles For the purpose of rapid passage, the opening time of the gate can reach 0.3 seconds at most.Two, parking payment WeChat, Alipay or other self service payment machines, handsets to pay WeChat or Alipay payment methods only need to post posters printed on the car park post with payment of two-dimensional code. The owner will scan mobile phone's WeChat scan before leaving the field, scan the two-dimensional code and enter the payment page, and pay the operation by the owner. Because of its low cost and strong interaction with the owner, it is convenient for the owner to use. TigerWong car park self service payment machine, support paper currency, coins payment and redemption, support WeChat, Alipay, UnionPay flash payment. Support IC card and paper ticket bar code billing, security alarm function, illegal door opening alarm, etc. to realize the intelligent charging system of unattended parking lot.Car owners can directly use the self-service payment terminal to complete payment, saving more time. The handset parking charge management system is generally applied to roadside parking or small and non centralized parking lots. When the vehicle enters the site, the administrator scans the vehicle number plate with the camera of the handset, automatically identifies the license plate number, makes the admission record and synchronizes it to the cloud. When the vehicle leaves the site, the administrator also scans the vehicle number plate with the camera of the handset. The handset recognizes the license plate number and calculates the parking fee synchronously with the cloud. The toll collector's handset can display whether the vehicle has self-service payment or payable fee.If no payment is made, the toll collector shall complete the charging and release operations. For more and more domestic capitalists involved in the parking industry, it is not possible to rely solely on the previous software and hardware comparison. The parking experience of car owners is the key to the first choice. If enterprises want to go further and further, and if the parking lot system wants to move towards the unmanned era, the parking experience is the first step towards success. Tiger Wong parking management system has a professional technical team! If you have any questions about parking lot system, etc., welcome to consult and exchange.

Parking lot management system is a set of network system built through computer, network equipment and lane management equipment to manage the access of vehicles in the parking lot, the guidance of traffic flow in the parking lot and the collection of parking fees. It is a necessary tool for professional parking lot management companies. It realizes the dynamic and static comprehensive management of vehicle access and on-site vehicles by collecting and recording vehicle access records and on-site positions. So, what is the function of this parking lot system? Please see Wuhan parking lot system experts for your detailed explanation
1. Image recognition function: when the vehicle enters the site, take the vehicle appearance, color, license plate number and other images through the camera, and compare the exit image with the entrance image when leaving the site to ensure the safety of the vehicle.
2. Voice prompt function: make voice prompt for important information, misoperation or illegal operation.
3. Multiple report output: vehicle information, charging information, traffic record, vehicle information and user information.
4. Applicable to a variety of inductive IC cards: ti-l (134.2k), ti-h (13.56M), hid, Motorola, Mifare, etc.
5. Anti smashing function: as long as the vehicle is under the gate, the gate will not fall, and the gate will fall automatically after the vehicle leaves.
6. Temporary card issuing: automatic card issuing machine shall be used to cooperate with the key to issue the card. It is prohibited to issue the card when there is no car or the parking space is full.
7. Offline operation function: all entrances and exits have networking function to ensure data consistency. When the network is short on and offline, the system operates normally, the network is connected and the data is recovered automatically.
8. It has a variety of charging or non charging management methods such as long-term card / monthly rent card / temporary card / management card
9. Led Chinese display screen: display time, charge amount, real-time number of vehicles, full parking space, card validity, etc.
10. Intercom function: ensure the communication between each entrance and exit and the management center.
1. Parking space guidance function: use ultrasonic to detect the occupied or idle state of a parking space, and send the detected parking space state change information to the parking space guidance controller to the best parking position in real time.
2. Anti smashing function: in addition to the anti smashing function of vehicle detector, the anti smashing function of people and vehicles can also be realized by using pressure radio wave or infrared technology. Since people or vehicles are under the road gate, the brake rod will not fall. After people or vehicles leave, the brake rod will fall automatically.
3. Multi area parking space counting function: for multi area or underground multi-storey parking lot, vehicle detector and counting controller are used to realize vehicle statistics in each area, which is displayed in real time through parking space counting display screen.