What Are the Classification of Parking Lot Gates and Gate Railings- TigerWong

With the development of society and the improvement of people's living standards, people are more and more used to taking cars instead of walking. The construction of parking facilities is also increasing. Parking equipment can be seen everywhere on roads, enterprises, industrial areas, shopping malls, communities and schools. I wonder if you pay attention to the variety of railings that control the entry and exit of vehicles. Tigerwong technology will talk about these parking gate equipment. The railings we usually see in the parking lot are raised and the vehicles in and out are completed by the gate machine. The gate is an automatic mechatronics technology only used by the parking lot system. The motor is controlled by the signal, and the forward and reverse rotation of the motor is used to realize the lifting and lowering of the gate railings. The gate railings are usually in a horizontal position, about 50 to 60 cm from the road ground of the parking lot. The classification of parking lot gates is generally divided according to the shape of gates and railings, which is more intuitive. At present, the parking lot system adopts automatic technology, so the current gate machines are electric, and the electric gate can be divided into artesian motor gate, AC motor gate and servo motor gate according to different motors. Among them, the electric gate system of servo motor is relatively accurate. The servo motor receives digital pulse signal to complete the action. This kind of electric gate is also called digital automatic gate, which is mainly used in high-end parking lot system. Gong series parking lot gate of tiger Wong technology is this type. What are the railings of the parking lot gate. Straight bar road gate. The railing of this kind of road gate adopts straight bar, which is a direct railing, which is generally about 4 to 6 meters long, which is widely used. Curved bar gate. The railing of the gate is composed of two parts of railings connected through mechanical components. It is a highly flexible curved bar mechanism. All rotating parts use self-lubricating rolling bearings or joint bearings, without wear and noise. The transmission mechanism makes the brake rod start from slow to fast and stop from fast to slow, effectively reduce the vibration of the brake rod, reduce the motor load, and greatly prolong the service life of the motor and mechanical parts, with a distance of less than 5m. Fence gate. The gate rod of the gate has beautiful shape, strong three-dimensional sense, does not occupy a place, and can be self adjusted and self optimized. It is especially suitable for supporting the use of expressway toll station and parking management system. The gate is more durable, more flexible and safer. The straight bar railing in the middle is the main bar to form a plurality of square fence effects, and the shielding area is larger. There are two railings and three railings. Because there are many railings, the center of gravity of the railings should enter from the gate, so this kind of gate railing is generally 4.5m. The above is what we usually see swinging parking lot railings. Interested friends can refer to Shenzhen tigerwong's parking lot gate product system for more detailed technical parameters and specifications.