The introduction of parking system

It is important to make sure that your introduction to a new product or service is engaging and easy to read.

Tips for parking system

After analyzing the problem of parking management, we came to the conclusion that a solution could be found by looking at the parking system itself.

How to use parking system?

The code of the parking system can be easily modified by an AIs to provide parking for the cars. It is possible to automate the process of parking the car and even take care of any problem that may occur during it.

The specifications of parking system

A parking system comprises a lot of different modules.

The product instructions of parking system

Automotive products have always been of prime importance in the lives of customers. This is one reason why a parking system must be so easy to use and intuitive to use.

The application of parking system

In 2017, there were 38 million parking spaces in China. But only 3% of these spaces were metered. The good thing is that the government has increased the number of metered spots to 20% by 2020 to bring more people into real estate and make them pay for them.

The difficulty of urban parking is becoming more and more serious. With the rise of people's purchasing power, car owners are no longer the envy of everyone, but there are also many hardships for car owners. Every time I go home and enter the community, the entrance and exit management relies solely on manual recording of the license plate number and parking time of incoming and outgoing vehicles, which takes a long time; Every time I reach for my card on a rainy day, I will inevitably get wet; The parking technology is not in place, it is also troublesome to get off and pick up the card, and all kinds of experiences are unbearable. In order to create a good parking environment for car owners, the management mode of parking lot is constantly changing, from the single function in and out management in the past to the diversified, intelligent and convenient management now. The birth of license plate recognition parking lot system has brought dawn to car owners.

License plate recognition system mainly extracts and recognizes the moving vehicle license plate from the complex background, and recognizes the vehicle license plate, color and other information through license plate extraction, image preprocessing, feature extraction, license plate character recognition and other technologies. At present, the latest technical level of tigerwong science and technology is that the recognition rate of letters and numbers can reach 99.7%, The recognition rate of Chinese characters can reach 99%. Residential areas generally have problems such as large gap between supply and demand of parking spaces and congestion between work and commuting. The license plate recognition system has the following three advantages to save you time, worry and trouble: first, the entrance and exit management of parking lot is intelligent. Install the license plate recognition equipment at the entrance and exit, record the license plate number and access time of the vehicle, and combine it with the control equipment of automatic door and railing machine to realize the automatic management of the vehicle. It can realize automatic time charging, automatically calculate the number of available parking spaces and give tips, realize automatic management of parking charging, save manpower and improve efficiency.

II. Automatic release to save manpower and material resources. Input the specified license plate information into the system, and the system automatically reads the license plate of the passing vehicle and queries the internal database. For vehicles requiring automatic release, the system drives the electronic door or railing machine to pass through, and other vehicle systems will give warnings and be handled by the personnel on duty. Three. In addition to the export charges, the system also provides a variety of self payment terminals, WeChat payment, Alipay charges, business transfer, handheld terminal charging and other payment methods, so as to further facilitate the owners and improve the efficiency of export traffic. With the development of science and technology, the traditional card swiping parking lot system has been gradually replaced by the license plate recognition system.

The license plate recognition system has quickly occupied most of our market share with the characteristics of fast traffic and convenient management, and the card swiping parking lot system will lose its price advantage in the fierce competition, Its function is single and relatively simple, and it will lose its market competitiveness. License plate recognition technology has developed more mature. Intelligent car parking system has greatly improved its position in the market by using license plate recognition technology, especially in some large parking places. Tigerwong parking ticket machine system manufacturer, focusing on parking equipment for many years! If you have any questions about the parking system, welcome to consult and communicate.

Corresponding protective measures shall be taken according to different corrosive media of license plate recognition system. When cable tray wiring is used in places with corrosion or special humidity. Plastic sheathed cables should be selected. When there are no design requirements, 2 metal wire shall not be used as the grounding conductor of the equipment. The total length of metal trunking shall not be less than 2 places, which shall be connected with PE or pen cable trunk line.

The cross section shall not be less than 4mm2, the two ends of the connecting couplers between galvanized trunking shall not be connected with grounding wire, and the two ends of the connecting plate between 3 non galvanized metal cable trays shall be connected with copper core grounding wire. However, there shall be at least 2 connecting and fixing bolts with locking nuts or locking washers at both ends of the connecting plate. Since metal trunking is mostly made of 0.41.5rhm thick steel plate, metal cable tray wiring is generally suitable for open laying in indoor places in normal environment. Its structural characteristics determine that metal trunking wiring should not be used in places with serious glass corrosion to metal trunking. It is a closed metal trunking with groove cover with fire resistance equivalent to metal conduit.

It can be laid in the ceiling of the building. It is also used in scientific research laboratories or projects with precast slab structure that cannot be concealed. It is also applicable to the transformation and replacement of lines in old projects. At the same time, it is also used for concealed laying in the ceiling of weak current lines. Plastic cable tray is generally suitable for open laying in indoor places in normal environment.

Metal trunking and grounding: and comply with the following provisions: metal trunking must have reliable electrical connection with PE or PF. N wire. 1. Metal trunking shall not be welded with jumper grounding wire. When there are no design requirements, 2 metal wire shall not be used as the grounding conductor of the equipment. The total length of metal trunking shall not be less than 2 places, which shall be connected with PE or pen cable trunk line. The cross section shall not be less than 4mm2, the two ends of the connecting couplers between galvanized trunking shall not be connected with grounding wire, and the two ends of the connecting plate between 3 non galvanized metal cable trays shall be connected with copper core grounding wire. However, there shall be at least 2 connecting and fixing bolts with locking nuts or locking washers at both ends of the connecting plate.

The straight lines numbered at branches and turns shall be marked. It is forbidden to spot weld the bridge directly on the metal structure. The license plate recognition system is used for the continuous connection of the combined bridge and the fastening bolts of the accessories. Attention shall be paid to the direction of the bolt device. After the bridge device is completed, it shall be classified according to the signs in the construction drawing.The bolt head shall be on the inner side of the bridge and the nut shall be on the outer side. The bolt length shall be moderate and shall extend about 10mm after fastening. When it is necessary to lead down the maintenance pipe to the equipment on the horizontal bridge, the pipe seat must be used. The length of the pipe end extending into the bridge shall be the same. The pipe orifice shall be equipped with a protective sleeve.The maintenance pipe shall be fixed firmly at a distance of 300-400 mm from the elbow of the maintenance pipe. The bending radius, standard elbow and combined elbow device require the use of standard elbow. The height of the frame shall meet the design requirements. The continuous connection of the elbow shall be free from stress at the interface. There shall be no bulge or distortion after connection.

Its longitudinal and transverse center lines shall be perpendicular to each other. The center lines before and after the elbow shall coincide or be parallel to each other. The bridge on the same floor shall be on the same horizontal plane before and after the elbow, and the deviation shall not be greater than 5mm. Special transition connecting plates shall be used, and elbows shall be assembled on site. The bending angle of license plate recognition system is generally 135 degrees, but not less than 90 degrees.

The perpendicularity deviation of cable shaft and vertically installed cable tray shall not be greater than 2 of length, the horizontal deviation shall not be greater than 2 , and the diagonal deviation shall not be greater than 5 of diagonal length. Such as telephone. Intelligent fire protection engineering. Television signal engineering, communication engineering. Such as TV monitoring system, cable TV. Sound reinforcement and sound engineering, such as background music broadcasting in the community and background music in buildings. It is mainly used for computer network. Weak current system is mainly aimed at buildings and generic cabling works. Including buildings, communities, airports, docks, railways, highways, etc. Rare weak current systems include: closed circuit television monitoring system, anti-theft alarm system, access control system, electronic patrol system, parking lot management system, visual intercom system, home intelligent system and security system, background music system, LED display system, plasma splicing screen system, DLP large screen system, three meter copy system, building automatic control system, lightning protection and grounding system Paging intercom and professional intercom system, weak current pipeline system, up UPS system, machine room system, generic cabling system, computer LAN system, property management system, multi-functional conference room system, cable TV system, satellite TV system, satellite communication system, fire protection system, telephone communication system, hotel management system, video on demand system, etc.