Pedestrian Passage Gate - Installation Principle of Wing Gate Swing Gate - Parking Space Guidance Sc

With the continuous improvement of people's requirements for door ban system, the application scope of access control system is becoming more and more extensive and mature. People's application of the door lock system is not limited to a single entrance and exit control, but also requires that it can not only be applied to the access control, attendance management, security alarm, parking lot control, elevator control, building automation, etc. of intelligent buildings or intelligent communities, but also can be linked with other systems to improve the technical role of security, It also improves the personnel passing speed and reduces the personnel management cost. 1 What is the swing gate? The structure and principle of the swing gate are introduced. The structure composition: the swing gate is composed of chassis, movement, swing arm and control system. Its swing arm swings both inside and outside, so it is usually called swing gate. It is used in stations, docks, subways, factories, buildings, intelligent communities, enterprises and institutions and other occasions that need to realize intelligent management of channels.

Product features: with fault self-test and alarm prompt functions, it is convenient for users to maintain and use; The running state of the equipment can be programmed online through the built-in small press disk on the main control board; Anti collision function: when the swing arm is blocked during reset, the motor will automatically stop working within the specified time, and the force is very small; Anti impact function: when the opening signal is not received, the swing arm will be locked automatically; The swing arm is synchronously adjustable (for double swing); The swing arm has the function of automatic reset. After opening the gate, if it does not pass within the specified time, the system will automatically cancel the user's permission to pass this time; The swing gate is powered off and normally open to meet the requirements of fire management; It can be connected with a variety of card reading equipment to receive relay switch signals; The swing gate is divided into two-way swing, one-way and two-way control personnel in and out; Remote control and management can be realized directly through the management computer; Delay automatic reset, the standard is automatic reset 5 seconds after opening; 2 What is wing gate? The structure and principle of wing gate are introduced. Wing gate is commonly used in subway, station, airport, park, dormitory and other passageways to manage the flow of people. Because its external image is the eagle spreading its wings, it is usually called wing gate. 1. The wing brake is mainly composed of chassis, movement, wing arm, control system, sensor and control equipment. The movement is the core component of the wing arm, which controls the flow of people by controlling the rise and fall of the wing arm through the mechanical part. The wing arm is the actuator of the wing gate.

Whether to release or not is realized through the lifting of the wing arm. The control system and control equipment are the core of the wing gate. After the received signal is processed, it sends a signal to the actuator to control the flow of people. The sensor generally adopts infrared sensor, which is installed in front of the wing gate. When someone reaches the position or other information arrives, it generates a signal and sends it to the control system for processing. 2. Wing gate function the wing gate shall not have the function of fault self-test and alarm, which is convenient for customers to maintain the wing gate; The running state of the equipment can be programmed through the keys on the main control board; The wing arm will reset again at the default time in case of resistance during reset; When there is no signal, the wing arm is locked to prevent collision; The wing brake is opened after power failure and closed after power on; Single and two-way control; It has counting function, etc. whether it is swing gate or wing gate, we generally call it channel gate.