Check All Kinds of Large Mechanical Three-dimensional Parking Lot Management System - Tigerwong Tech

At present, there is a serious shortage of parking spaces in both residential and commercial buildings in China. With the rapid growth of motor vehicle ownership in urban areas, the problem of urban road traffic congestion and difficult parking has become increasingly prominent. In this regard, many parking lot manufacturers are studying large mechanical three-dimensional parking lots to alleviate the problem of urban parking. With the continuous development of technology, the scope of application of mechanical parking spaces with high space utilization has also been expanded to various owner built projects such as residential areas, business office buildings, hotels and so on, Let's take a look at all kinds of large mechanical three-dimensional car parking management systems with tiger Wong. I. lifting and traverse type the lifting and traverse type parking space is two or more layers.

The car placing plate on the same layer with several layers can be shifted laterally from left to right, and the height of the car placing plate can be changed through the lifting mechanism. It can be ground type or pit type. The following is the principle of lifting and transverse parking lot system: 1. Access frame: it can allow vehicles to pass normally. 2. Garage group fixed on the access frame: it is a multi-storey structure, and each floor includes at least two or more unit garages that can store vehicles. 3. Longitudinal elevator: it is set in garage group and access frame. 4. Lateral moving frame: it can move between the elevator and the unit garage. 5. Push type switching device: it can place the vehicle on the transverse moving frame on the unit garage or retrieve the vehicle on the unit garage on the transverse moving frame. 6. Control system PLC: it controls the storage or removal of vehicles. This is the core component of the large mechanical garage, which is mainly divided into the following five subsystems, including: automatic toll management system, automatic access vehicle system, remote diagnosis system, automatic gate system, monitoring and security system. The above systems are uniformly controlled by the central control room, which can plan the parking garage management form for customers, release the garage inventory capacity and control the traffic flow scheme.

The characteristics of the lifting and transverse parking space are: making effective use of the space and improving the space utilization rate by several times; The access vehicle is fast and convenient, with unique cross beam design, and there is no obstacle for vehicles to enter and exit; PLC control, high degree of automation; Environmental protection, energy saving and low noise; Good man-machine interface, multiple operation modes can be selected, and the operation is simple. II. The simple lifting parking space is two or three floors, and the height or inclination angle of the vehicle plate is changed through the lifting mechanism or pitching mechanism for vehicle access. It can be above ground or with pit. The simple lifting parking space is characterized by simple and practical structure without special ground foundation requirements. Suitable for factory, villa, residential parking lot; It can be moved freely, easy to move and install, or independent and multiple equipment according to the ground conditions; Equipped with special key switch to prevent outsiders from starting the equipment; Anti sliding safety device of vehicle plate.

III. multi layer circulating type each car plate is arranged in two or more layers. Vehicle elevators are set at both ends between two adjacent layers. The car plates on the same layer can move horizontally in this layer. Circular circulation type refers to the one in which the car plate is raised and lowered by circular motion at both ends of the equipment; Those who rise and fall in vertical motion are called box circulation type. The vehicle warehousing method is the same as the horizontal cycle.

IV. vertical circulation vertical circulation parking space drives each vehicle plate arranged vertically to make continuous circular movement through transmission machinery. The vehicle entrance and exit located at the bottom of the equipment is called lower entrance and exit type; Located in the middle part is called middle entrance and exit type; The one at the top is called the upper entrance and exit type. It can be closed high tower or open low tower. The characteristics of vertical circulation parking space are: automatic shunting with PLC, and vehicle access can be completed with one key; It can be set on the ground or semi ground and semi underground, can be independent or attached in the building, and can also be combined with multiple sets; It can save a lot of cost of purchasing land and is conducive to rational planning and optimal design; Generally, forced ventilation is not required, there is no large-area lighting, and the power consumption is only 35% of that of ordinary underground garage. V. plane mobile type on the same level, use the handling trolley to move the vehicle horizontally, or make the plane of the vehicle plate move laterally.

It can be single-layer plane traverse, single-layer (multi-layer) plane round-trip and multi-layer translation of gantry crane. The characteristics of plane mobile parking space are: the platform and elevator on each floor act respectively to improve the speed of in and out of the warehouse, the underground space can be used, and the parking scale can reach thousands of units; Failure in some areas will not affect the normal operation of other areas; Comprehensive management through computer and touch screen interface can comprehensively monitor the operation status of equipment, and the operation is simple. Vi. the horizontal circulation type vehicle boards are arranged horizontally in two or more rows and move circularly. The circular circular type is called the circular type when the carriage plate circulates in a circular motion; Those who circulate in a linear motion are called box circulation. VII. The roadway stacking type adopts the roadway stacker and the transporter to move the vehicles entering the transporter in a plane and lift them vertically to the parking space, and then send the vehicles to the parking space by the access mechanism.

The characteristics of roadway stacking parking space are: fully closed management, safety and anti-theft, providing the best protection for vehicles; It can be set on the ground or underground to make full use of the effective space; The lifting and walking of the carrier plate run at the same time, so it is convenient and fast to access the vehicle. Fully closed management, safe and reliable, to ensure the safety of people and vehicles; The vehicle loading and unloading operation is realized by conveying the vehicle loading plate through the elevator, walking trolley and transverse device, and the whole process is completed automatically; The configuration form of fixed elevator walking trolley on each floor can realize multiple people to access the vehicle at the same time. VIII. The lifting device for vehicle handling in the vertical direction of the special automobile elevator is generally suitable for garages without self-propelled ramps. IX. the high-rise parking equipment composed of vertical lifting (tower warehouse) parking space and vehicle elevator in a three-dimensional way carries the vehicle or vehicle carrying plate horizontally or vertically from the vehicle elevator to the parking space through the handling machinery. The parking space is divided into horizontal type, vertical type and circumferential type.

The characteristics of vertical lifting (tower garage) parking space are: small land occupation, large vehicle capacity, and the highest high-rise design can achieve an average space of only one square meter per vehicle; Multiple parking spaces can be provided at the same time, with short waiting time; High degree of intelligence, can reserve access vehicles and empty parking space guidance; The gap space of the garage shape can be used for greening, so that the garage can become a three-dimensional greening body, which is conducive to beautifying the city and the environment. The multi-layer circulating three-dimensional mechanical car parking management system does not need a ramp, saves the floor area, automatically stores and takes the car, which is convenient and fast, so as to realize the mechanical parking garage that reduces the floor area and improves the automation of car access. It is also a major means to solve the problem of parking. At present, there are still many fields to be developed in the intelligent transportation market, with broad market prospects. It will continue to show a trend of rapid growth for a long time, and intelligent transportation will be more mature in the future.

Tigerwong parking equipment supplier has focused on parking equipment for many years! If you have any questions about the parking system, welcome to consult and communicate.