What Kind of Wire Is Used for Ground Induction Coil in Parking Lot and Precautions for Installation

Nowadays, the parking problem, whether it is urban traffic, shopping malls or residential areas, is very concerned by people, and there are still many contents that need to be paid attention to in the construction of parking lot system, such as ground feeling. Let's take a look at the problems of ground induction coil in parking lot system with Xiaobian. I. material of ground induction coil: many friends don't know what wire to use for ground induction coil. In fact, without considering the environment, the area, turns and perimeter can be considered for the embedding of ground induction coil (regardless of the material of conductor). But in the actual construction process, we have to consider the anti-aging of wires and the acid and alkali corrosion of conductors in different environments. After all, the damage of wires will affect the normal work of vehicle detectors. Therefore, it is suggested that you can use teflon high temperature flexible conductor above 0.75-1.0mm. Two, when installing the coil, the matters needing attention: 1, coil material: in actual engineering, we must consider the corresponding wire mechanical strength and related problems related to high and low temperature and anti-aging, and then there are a series of problems that need to be considered when the environment is bad. 2. Coil shape: there are three general coil shapes: rectangular installation and inclined 45° There are also figure 8 installations. The first installation method requires that the two long sides must be perpendicular to the metal object; The second installation method needs to pay attention to the inclination of the coil with the driving direction 45° Installation of; The third situation is that when the road surface is more than 6m and the corresponding vehicle chassis is too high, this installation form needs to be used for measuring points to improve the sensitivity. 3. Coil turns: generally, when the inductance corresponding to the coil remains unchanged, the relationship between the corresponding coil turns and the circumference is very important. In the corresponding actual construction process, it is necessary to ensure that the final inductance value of the coil should be within a reasonable working range. After the coil is buried, in order to strengthen protection, a circle of nylon rope can be wound around the coil. Finally, seal the cutting groove with asphalt or soft resin. Tigerwong parking equipment supplier has focused on parking equipment for many years! If you have any questions about the parking system, welcome to consult and communicate.