Discussion on Several Anti Smashing Vehicle Technologies of Intelligent Parking Lot Gate System - Ti

The parking lot gate is a parking lot equipment used to control the entry and exit of vehicles. When releasing vehicles, the railings rise and the vehicles fall through the rear railings. Due to technical or management reasons, the road gate smashes cars or people from time to time, resulting in vehicle damage, personnel injury and tangled responsibilities, which makes people pay more and more attention to the safety of the parking lot road gate system. Ensuring safety is the basic principle of Shenzhen tigerwong's design of parking lot system. She has rich experience in road gate smash prevention. So what are the commonly used anti smashing technologies in the parking lot system? Let's introduce it to you. Shenzhen tigerwong Gong series anti smashing road gates 1. Ground sense anti smashing technology. Generally, the parking lot is equipped with ground sense. When the vehicle detector detects the ground sense trigger signal, it will control the brake rod to rise and maintain the vertical state. The rod will fall as long as the ground sense signal disappears. The key to this anti smashing technology lies in the stability of the ground induction coil. If the ground induction coil feels interference, it may fail. Moreover, the ground induction can only detect vehicles and does not have the function of anti smashing people. 2. Infrared anti smashing this method is to install infrared radiation devices on both sides of the entrance and exit gate. During the falling process of the gate rod, if a vehicle drives in and the infrared is blocked, the gate rod will rise automatically and respond quickly. However, the infrared radiation range is small, and it is easy to be disturbed by rain and snow weather 3. Pressure wave anti smashing is also called anti smashing in case of resistance. It is mainly to install the return device in case of resistance. When the road gate rod contacts the vehicle or pedestrian during the falling process (the contact force can be adjusted), the rubber strip under the road gate rod of the device is subject to resistance. The intelligent return device in case of resistance will immediately convert the falling rod state into the rising rod state, and the road gate will rise to prevent the vehicle from smashing people. 4. The digital anti smashing technology has high security and high cost. The digital automatic anti smashing vehicle detection technology does not need other auxiliary protection devices to accurately collect the operation data of the brake rod in real time and monitor the operation. Once the operation is blocked, the brake rod will rise rapidly. Well, the above are several anti smashing technologies often used in intelligent parking lots. I hope they can help you.