How to Realize the Safety and Anti Smashing of the Road Gate in the Parking Lot System?

In today's rapidly developing society, the active gate system provides great convenience for people's life, work and travel. They can be seen in communities, parking lots, shopping malls, office buildings and so on. How can we ensure that the gate rod will not fall and smash cars in the operation of the active gate?1. Ground sense anti smashing skillsGenerally, the parking lot management system is equipped with ground sensing coil. When the parking lot system detects the ground sensing trigger signal, it will control the road gate rod to rise and adhere to the vertical condition. Once the ground sensing signal disappears, the gate rod will automatically fall. The key to this anti smashing skill lies in the stability of the ground inductance coil. If the ground inductance is disturbed, it may fail, and the ground inductance can only detect vehicles and does not have the function of anti smashing people.

2. Infrared anti smashing skillsThis way of anti smashing is to install infrared radiation equipment on both sides of the entrance and exit gate. During the falling process of the gate rod, if the infrared receives resistance when a vehicle drives in, the gate rod will rise actively and respond quickly. However, the infrared radiation range is small, and may be disturbed by rain and snow weather, so the application range is limited.3. Anti smashing skills of pressure wave

This anti smashing skill is mainly used to control the rise and fall of the road gate rod by installing the equipment that comes back in case of obstruction. When the road gate rod contacts the vehicle or pedestrian during the falling process, the rubber strip at the bottom of the road gate rod will be subject to resistance, and it will actively change from the falling state to the rising state, so as to prevent the vehicle from smashing people.4. Anti smashing skills of digital rebound in case of resistanceThe digital active anti smash vehicle measurement skill is mainly that the parking lot system monitors the operation of the stop bar by collecting the operation data of the stop bar in real time and accurately. Once the stop bar is blocked in the operation process, the stop bar will rise quickly. This skill does not need other auxiliary protection equipment and has high safety, but its cost is naturally high, and it is not widely used at present.