RFID Parking Lot Vehicle Entry and Exit Workflow_ Taigewang Technology

RFID is more and more widely used in parking lots. Thanks to its characteristics of long-distance card reading and card swiping without stopping, we won't talk about it in detail. This time, we want to introduce the entry and exit engineering process of RFID parking lot. Let's first look at the RFID entry process: the driver places the electronic tag card in front of the vehicle. In the set area, the card reader (also known as the reader) will automatically read the information on the RFID card. If the RFID card is normal, the information will be written on the RFID card. If the RFID card expires or is damaged, there will be a prompt tone. While the card reader reads the card, the system captures the image of the approaching vehicle and transmits it to the computer for storage. After reading and writing the card, the card reader sends out a prompt sound, such as welcome, etc. the gate will open automatically, the vehicle will drive into the yard, the vehicle will leave, and the gate will fall automatically. This is the completion of mobilization. The following is the exit process: when the vehicle leaves, in the set area, the card reader (also known as the reader) will automatically read the information on the RFID card, such as entry and stay time, vehicle image, etc. the system will automatically deduct the fee according to the entry and exit time and charging mode, and write the information on the RFID card. At the same time, the system will capture the vehicle image and compare it with the charging information The exit time and other information are uploaded to the computer for storage. At this time, the card reader will have a prompt tone to prompt the charging amount, and there will be subtitles on the display screen. The gate will open automatically, the vehicle will leave, the gate will fall automatically, and the exit of the vehicle is completed.