Smart New Town Parking Lot System - Smart Gate System - Tigerwong Technology

The parking lot of smart new town adopts intelligent road gates with automatic identification and automatic pole lifting. The electric Lane gate supporting the intelligent road gate system has the functions of preventing pole lifting and vehicle smashing; The detection device of the system adopts advanced digital to analog conversion technology, has strong anti-interference ability, adapts to various harsh environments, and has the unique feature of improving sensitivity and reliability at the same time; The system can query the parking space at any time. When the parking lot is full, the red light with the word full will be automatically lit and the entrance entry operation will be automatically stopped. 1. High sensitive limit switch is adopted to instantly control the rod lifting and falling in place and accurately. 2. Adopt the most stable non constant speed operation mechanism to make the brake rod start slowly, run quickly and stop slowly, and eliminate the jitter caused by the brake rod during the start and stop of operation. 3. The motor is equipped with intelligent overheating protection system, which controls the temperature rise of the motor under frequent use, so that the motor is not easy to burn out. 4. Professional aluminum shell motor wave collector reducer integrated design, low noise and fast heat dissipation. Brake lever 1. The quick lever has a unique function of not hurting the vehicle. A vehicle with a speed of 80 km / h will not hurt the main engine when it hits the brake lever. 2. The brake rod has a permanent 90 degree angle movement mechanism to avoid accidents caused by 360 degrees. 3. The protection part of the anti smashing rod is made of soft colloidal material. In case of human operation error or mechanical failure and other accidents, it can avoid damaging vehicles and pedestrians. Control system 1. It has landing rod delay protection to effectively prevent limiter failure and protect the motor. 2. Anti smashing function shall be provided in the process of rod falling to effectively avoid hurting people or objects in the process of rod falling (detector shall be added). 3. The digital chip technology is adopted, and the anti smashing, ground sensing and IC interfaces are integrated, with good stability and zero misoperation probability. In particular, it is equipped with delay protection function and dual control effect. 4. The rod dropping process can quickly respond to the rod lifting or stop signal and ground sensing signal, with high safety. 5. With automatic delay rod dropping function, when there is no vehicle or object detected, the anti smashing rod will drop automatically.