How to Correctly Select and Install Parking Lot Gate - Tiger Wong Technology

As an important part of the intelligent car parking management system, the parking lot gate plays a very important role in our life under the condition of serious parking problems. As a system for managing traffic flow, the parking lot gate is often combined with the parking lot system, so we should pay more attention to its selection and installation, Choosing a road gate suitable for your own parking lot can make people park and pick up cars faster and more convenient in future parking management. 1 Selection of parking lot gate: at present, there are many kinds and functions of parking lot systems on the market. Therefore, there are many kinds and styles of gate equipment supporting the parking lot system. For users, choosing a gate equipment suitable for their own use needs special attention. First of all, the types of road gates are divided into straight bar road gates, two bar road gates, three bar road gates and advertising road gates according to the different road gates. According to the different places where users use, the advantages of each road gate are different.

Users should properly combine the parking lot system and region used in their own parking places to select the appropriate parking road gates. In addition, an important part of selecting the gate is the movement performance of the gate. Each gate is equipped with different movement performance according to the length and type of gate rod. In order to ensure the service life of the gate, we are equipped with single movement and double movement gate equipment according to different user needs. Of course, the performance of the movement is different, and the price will also vary a lot.

Therefore, this is also the reason why the parking lot system with seemingly the same function and the price are far different. 2 Installation of parking lot gate: 1. Horizontal problem: the gate should be installed on a horizontal plane. If the road surface is uneven and has a slope, a horizontal platform should be built. The wiring installation can be carried out according to the drawings. Generally, there will be no problem. 2. Test of ground induction coil: when the intelligent car parking system is connected, the ground induction coil can be tested. Do not wait until the ground induction wire is buried.

The test method is that when the ground sensing red light flashes, put the iron plate on the coil, take away the iron plate when the red light is on for a long time, and the brake rod will fall automatically. 3. Installation of ground induction coil: two ground induction coils are generally installed in one lane, one at the front and one at the back. The installation method is to cut a square nest with a depth of 10cm and 640x960.8m, cut the four corners into 45 degrees, place 5 to 6 cycles of wires and press them tightly. There are no joints or damages inside the coil. After installation, seal it with dry cement. 4. Problem of brake rod length cutting: if the brake rod is cut, the torque balance needs to be readjusted according to the rod length to avoid overheating of the motor and wear of the reduction gearbox. Excellent groups are inseparable from the play of individuals, and so is the parking lot system.

As the final execution equipment of user authority in the parking lot system management function, the parking lot gate is very important in selecting the parking lot gate. In order to make parking more convenient, it is necessary to improve the hardware facilities of these parking lots in order to make parking no longer difficult. Tigerwong parking equipment supplier has focused on parking equipment for many years! If you have any questions about the parking system, welcome to consult and communicate.