loading
Ticket parking management dispenser with rfid card reader with camera for facial detection TGW-NAC 1
Ticket parking management dispenser with rfid card reader with camera for facial detection TGW-NAC 2
Ticket parking management dispenser with rfid card reader with camera for facial detection TGW-NAC 3
Ticket parking management dispenser with rfid card reader with camera for facial detection TGW-NAC 1
Ticket parking management dispenser with rfid card reader with camera for facial detection TGW-NAC 2
Ticket parking management dispenser with rfid card reader with camera for facial detection TGW-NAC 3

Ticket parking management dispenser with rfid card reader with camera for facial detection TGW-NAC

The TGW smart card parking ticket dispenser is a solution specifically designed for the handling, processing and printing of parking tickets. The typical application for this device are off-street parking facilities and parking management systems. Yet, it could also be used in other applications in which QR-/Barcode tickets need to be processed
Power Supply:
12V/24V 5A
Motor Power:
100-240V
Open/close Speed:
0.8-3S
Working Frequency:
50/60 Hz
Sensor:
Vehicle detector
User Capacity:
No limit
Card collector:
Available
Card dispenser:
1 pcs
Please fill out the form below to request a quote or to request more information about us. please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.

    oops...!

    no product data.

    Go to homepage
    Customization
    Available
    Place of Origin
    China
    Ticket parking management dispenser with rfid card reader with camera for facial detection TGW-NAC 4
    Product information

    The parking ticket dispenser is divided in three modules. This allows you to scale and configure the device according to needs and requirements of your specific application. The three modules define themselves as follows:

    1. Processing module: The processing module is the main module of the system, hosting the main PCB board and all physical interfaces (USB, RS232, Ethernet). It is capable of accept tickets, read them (1D/2D Codes or RFID tickets), print and either return the to the user or collect them within the device.
    2. Feeder module: The feeder module is equipped with a double feeder and pulls in its tickets via a fanfold or a roll into the system. The tickets are also separated within the feeder module and then feed to the processing module.
    3. Park module: The third module in the system is the park module, which allows the device to handle three different tickets at the same time. This is possible because the park module allows two tickets to be parked within the unit, while a third ticket is being processed.

    In a potential use-case of a parking facility, the system could be configured in a combination of these modules:

    1. Parking entry: For the entry the processing and feeding module would be necessary in order to feed, print and dispense the ticket to the customer.
    2. Payment terminal: In this case it would be possible to benefit from all three modules, in order to handle multiple tickets, vouchers, etc. at the same time also print new tickets as an e.g. receipt.
    3. Parking exit: When leaving the parking facility, it could be sufficient to only use the processing unit, to verify a paid ticket and either reprint the ticket and return it to the customer or capture into the device.

    Apart from its scalability, another advantage of the modular approach is that each module can be combined with one another with only a few handles.

    This parking ticket dispenser is capable of printing 1D/2D QR- and barcode tickets. For doing that, the system supports the printing and software integration with an integrate code-generator. Additionally, the printer is capable of printing all common international fonts and the integrated firmware also allows you to print pictures and logos onto the tickets.

    The tickets are being read with two barcode readers from the top and the bottom. Depending on the application, the parking ticket dispenser can also only be implemented with one reader.

    On top of that, the whole unit can be optionally equipped with RFID readers and if desired additional RFID antennas.

    The complete parking ticket dispenser has been designed and developed on the basis of our 30-year experience in processing various tickets within toll stations and public transport. The general construction of the unit is based on our proven and robust aluminum concept with a strict separation of mechanics and electronics. For the potential replacement of wear parts, no tools are necessary for this parking ticket dispenser.

    Areas of application:
    • Off-street parking facilities
    • Parking management systems
    • Other applications for managing/processing QR-/Barcode tickets
    get in touch with us
    just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs
    Related Products
    no data
    Shenzhen Tiger Wong Technology Co., Ltd is the leading access control solution provider for vehicle intelligent parking system, license plate recognition system, pedestrian access control turnstile, face recognition terminals and LPR parking solutions.
    no data
    CONTACT US

    Shenzhen TigerWong Technology Co.,Ltd

    Tel: +86 13717037584

    E-Mail: info@sztigerwong.com

    Add: 1st Floor, Building A2, Silicon Valley Power Digital Industrial Park, No. 22 Dafu Road, Guanlan Street, Longhua District,

    Shenzhen,GuangDong Province,China  

                        

    Copyright © 2024 Shenzhen TigerWong Technology Co.,Ltd  | Sitemap
    Contact us
    skype
    whatsapp
    messenger
    contact customer service
    Contact us
    skype
    whatsapp
    messenger
    cancel
    Customer service
    detect