What Should We Pay Attention to When Purchasing a Gate- TigerWong

Road gate (there are many names, such as automatic road gate, intelligent road gate and car stopper) was originally used on the highway to collect fees for parking. However, with the development of intelligent community, its application in the community can be said to be very common. I believe everyone will not be unfamiliar with the road gate. The gate is not the most expensive equipment in the parking lot system, but it is definitely the most important equipment, because once the gate fails, it will affect the operation of the whole parking lot and may lead to the paralysis of the parking lot system. Therefore, it is not too much to choose thousands of gates. Here we put forward some suggestions on how to buy the gate for your reference. 1. Use occasion of the gate. According to the take-off and landing speed, the gate can be divided into high-speed gate, medium speed gate and slow gate. The corresponding time is 1 second, 3 seconds and 6 seconds respectively. It is suitable for unused places. The highway gate is suitable for highway toll collection; Medium speed road gate is suitable for intelligent buildings, residential areas, etc; Low speed road gates are suitable for residential areas with low requirements. You should buy this according to your specific needs. 2. Gate control mode. There are generally three control modes for the gate: manual control, remote control and controller control, which can be selected according to the demand. 3. Gate transmission mode. The transmission modes of the gate generally include belt transmission, hydraulic transmission, mechatronics transmission, etc. Belt drive is a relatively backward transmission mode. It adopts motor drive, belt transmission, high noise, poor balance stability, and the belt is easy to be damaged and short service life. In short, it has many disadvantages, but the advantages are also very prominent, that is, low cost. Hydraulic transmission has good stability, simple structure, fast transmission speed and low sound. It is an ideal transmission mode, but it has high damage rate after impact and troublesome maintenance, which requires professionals. Mechatronics transmission mode refers to the integration of motor and reduction mechanism. It is the latest transmission mode. It has good stability, simple adjustment and less faults. Moreover, the motor can be selected according to different rod lengths, which is more flexible. 4. Performance of the gate. This should be the key factor to investigate. You can check whether the gate has passed some test reports, such as CE ISO, how the waterproof and lightning protection performance is (here we secretly say that our tigerwong technology gate has level IV lightning protection performance, which is a large part higher than that of its peers), the strength of the manufacturer, etc. When purchasing, consider the above four aspects. I believe you will choose the right gate. Thank you for your reading. If you have any needs in this regard, please contact us.