What Are the Functions of Intelligent Gateway System and What Is the Difference From Traditional Acc

The road gate, also known as the car stopper, is an entrance and exit management equipment specially used for road and parking to restrict the driving of motor vehicles. The intelligent gate can be said to add some intelligent design on the basis of the ordinary gate, but there is a lot of knowledge here. The traditional gate is purely for blocking the car, and the rest, such as identification and management, have no role, but the intelligent gate is not like this. The traditional gate and access control generally have the following components: 1. Access control controller: the core part of the access control system, which is equivalent to the CPU of the computer, and is responsible for the processing, storage and control of the input and output information of the whole system. 2. Card reader: a device that reads the data (biometric information) in the card. 3. Electric lock: the executive part of door locking in the access control system. Users should select different locks according to the door materials, exit requirements and other needs. 4. Card: the key to open the door.

The card holder's personal photo can be printed on the card, and the door opening card and chest card can be combined into one. 5. Other equipment. In addition to the above functions, the intelligent gate also adds some advanced science and technology: 1. License plate recognition technology; 2. High speed electronic gate control system; 3. Intelligent management software system. The most obvious advantage of intelligent road gate is non-stop traffic. Of course, there are other advantages: 1. High degree of automation, large saving of human and material costs and low comprehensive cost. 2. Compared with the manual control of the entrance and exit caretaker, it realizes a considerable degree of automation, reduces the work difficulty and workload of the entrance and exit caretaker, and reduces the incidence of human accidents. 3. Compared with the parking lot system for close card swiping to confirm identity, it realizes a considerable degree of intelligence and eliminates the cumbersome process of parking, window opening, card swiping and start-up of vehicles of the unit (system); Instead, there is no need to stop and pass through the entrance and exit directly. 4. It can run offline without complex system software, and can transmit the vehicle passing record when running offline when online again. For some traditional road gates smashing vehicles and people, the intelligent road gate has well prevented this: 1. Induction detection anti smashing, that is, when the vehicle does not leave the ground sensing range under the gate rod, the gate will not fall. 2. Infrared detection and anti smashing: use infrared radiation to detect whether there are vehicles or pedestrians in the area directly in front of the gate.

When there is a block within the detection range of infrared radiation and anti smashing, the gate will not fall. 3. Moment smash prevention: if the gate encounters resistance when falling, it will immediately stop falling and lift the rod, which is an important measure to prevent the car or person from being injured. 4. A shock absorbing inflatable rubber tube is embedded at the lower edge of the gear rod, so even if it hits the vehicle or person, it is also an inflatable elastic rubber tube, not a metal rod, so as to avoid serious injury to the vehicle or person. With the continuous progress of science, more and more new technologies will join the parking family. Parking enterprises will also provide parking users with more powerful technologies, better equipment, more accurate algorithms, more rigorous processes and more reliable after-sales services. Solving parking difficulties will no longer be a problem. Tigerwong parking equipment supplier has focused on parking equipment for many years! If you have any questions about the parking system, welcome to consult and communicate.