What Are the Equipment Components of a Standard Intelligent Parking Lot System - Tigerwong Technolog

In recent years, with the gradual increase of vehicles in big cities, parking lots have gradually increased correspondingly. Although many parking lot system manufacturers have been slogans of unattended parking lots in recent years, due to some objective reasons, people will still be required to be on duty, It also makes many parking lot administrators unable to correctly tell what the equipment of a standard intelligent car parking system is, and they have to know the specific functions or locations of some equipment when they need maintenance or fail. Now, little editor tigerwong will tell you about the equipment composition of a standard intelligent car parking system. Let's have a look. I. parking space guidance system parking space guidance system is a full computer management system, which needs to detect the situation of each parking space in real time. Therefore, a detector can be set in each parking space and incorporated into the management software subsystem through the signal processor.

After the analysis of the management software, the current best parking space will be displayed to the driver on the parking space display screen, and the parking space prompt light will turn on and flash, Prompt the driver to stop here. If the parking space detector detects that there is no vacant parking space in the garage, the parking space display screen displays the word garage full, and the ticket machine also displays the word garage full, that is, vehicles are no longer allowed to enter the garage. II. Anti theft system the anti-theft system is a set of high code remote controller installed in each parking space, which works in parallel with the parking space detector. When the driver parks the car in the warehouse, operate the remote control to code the vehicle; When the driver is ready to pick up the vehicle from the warehouse, operate the remote control to decode the vehicle. If there is no decoding to pick up the vehicle, the alarm system will work and link the relevant alarm or start the monitoring system for video recording to prevent the vehicle from being stolen.

III. the charging control equipment of the charging system is composed of charging control computer, UPS, report printer, console, entrance manual button, exit manual button, voice prompt system and voice intercom system. The parking lot toll collection system adopts a non-contact smart card, and a set of entrance and exit management equipment is set at the entrance and exit of the parking lot, so that the parking lot forms a relatively closed place. Just shake the IC card in front of the card reading box, the system can instantly complete the inspection, recording, accounting, charging and other work, and the lane gate can be opened and closed automatically, The management of the parking lot is carried out conveniently and quickly. Both the vehicle owner and the management personnel of the parking lot hold their own smart card as personal identification. Only the smart card approved by the system inspection can operate (management card) or enter and exit (parking card), which fully ensures the security and confidentiality of the system, effectively prevents vehicle theft and eliminates the worries of the vehicle owner.

IV. monitoring system the monitoring system is composed of camera, controller, monitor and video recorder. It is mainly to monitor the security of the parking garage to ensure safe and reliable parking. V. image comparison system the image comparison system is composed of camera, capture controller, image processor, etc. When the vehicle enters the warehouse to swipe the card or pick up the ticket, the capture controller works, starts the camera to record an image of the vehicle and coexists in the system database together with the card or ticket information held by the driver. When the vehicle leaves the warehouse for card or ticket inspection, the capture controller works again, starts the camera to take the image of the license plate number, and then compares it with the information in the system database. If the information is consistent, the vehicle will be released by the automatic road brake; Otherwise, the prompt message will not be released and an automatic alarm will be given.

Vi. the entrance part of the entrance and exit license plate recognition system is mainly composed of entrance ticket box (including inductive ID card reader / writer, automatic card exit machine, vehicle sensor, voice prompt system and voice intercom system), automatic road gate, vehicle detection coil, license plate recognition, entrance camera system, etc. The exit part is mainly composed of exit ticket box (including inductive ID card reader, voice prompt system and voice intercom system), automatic road gate, vehicle detection coil, license plate recognition, exit camera system, etc. Tigerwong license plate automatic recognition is a pattern recognition technology that uses the dynamic video or static image of the vehicle to automatically recognize the license plate number and color. Its hardware foundation generally includes trigger equipment (monitoring whether the vehicle enters the field of view), camera equipment, lighting equipment, image acquisition equipment, processor for recognizing license plate number (such as computer), etc. its software core includes license plate location algorithm, license plate character segmentation algorithm and optical character recognition algorithm. When the vehicle detection section detects the arrival of the vehicle, it triggers the image acquisition unit to acquire the current video image. The license plate recognition unit processes the image, locates the license plate position, segments the characters in the license plate for recognition, and then forms the license plate number output. VII. Central software management system central software management system is the core part of the whole parking lot intelligent management system.

The management center can be used as a server to connect with subordinate equipment through bus, exchange operation data, make automatic statistics on operation data and keep files. The system has password protection function to prevent unauthorized persons from invading the management program, and has strong graphic display function. It can display the parking garage plan, real-time occupation of parking spaces, opening and closing status of entrances and exits and channel blocking on the screen, which is convenient for parking lot management and scheduling. It should not only provide a flexible and effective management mode for the construction unit, but also have self-maintenance function and certain expansion function to meet the needs of future technology development. Generally speaking, the parking lot system is divided into two parts: software and hardware.

The software part mainly writes the functions to be realized in the parking lot into the program, and realizes the functions of each part through the computer; The hardware part is used to realize the function of the software program. Through rewriting the software part, the parking lot system can realize different functions. Tigerwong parking equipment supplier has focused on parking equipment for many years! If you have any questions about the parking system, welcome to consult and communicate.