There Is Only One Entrance and Exit. How to Configure the Parking Lot System- TigerWong

There is only one entrance and exit. This situation is common in some small parking lots, communities and enterprises. In view of this situation, we need to install the parking lot system. How can we plan and configure it better? Here we can plan according to the road width, which can be divided into two cases. 1. If the road width is narrow and less than 5m, you can configure two control machines, one installed on the left side of the entrance and exit as the entrance card reader, and the other installed on the left side of the exit as the exit card reader. If there is a charging place, it is generally installed next to the exit control machine for convenient fee collection. Here, our two controllers can share one gateway, so we only need to configure one gateway. In addition, you can install a remote card reader to control the gate, so as to realize no card swiping and no parking. It is also more economical and convenient. 1. The entrance and exit of the parking lot with a road width of less than 5m. 2. If the road width is more than 8m, you can install a safety island in the middle of the road to make the vehicles flow well. This is a relatively standard entrance and exit mode. The conventional size of the safety island is 5.5m & times; 1.3m & times; 0.18m (length, width and height). Installing the parking lot equipment on the safety island can reduce vibration, prevent vehicles from colliding with the chassis and play a protective role. In addition, sentry boxes can be installed on the safety island and management computers can be configured to facilitate the management of charges. Here we need to configure 2 control machines, 2 Road gates, and some peripheral equipment, such as monitoring equipment. 2. Entrance and exit configuration of parking lot with pavement width exceeding 8M