The Service Life of Parking Lot Gate Is Short, and Daily Maintenance Is the Key - Tigerwong Technolo

In recent years, the parking problem has annoyed many owners. With more advanced technologies joining the parking family, it makes people's parking more convenient and the management of parking managers more convenient, and quickly occupies all fields of life. Of course, we can't only see the convenience it brings to people, but also need proper maintenance. Let's work with tiger Wong to see how to maintain the parking lot gate during installation and use. I. some problems also need to be paid attention to during the installation of parking lot gate: 1. The installation of intelligent parking lot gate is generally on a horizontal road.

If there is a slope, pay attention to the installation specification. 2. The installation of the intelligent parking lot gate must be carefully inspected after the line is connected. If the detection operation is abnormal, it must be reinstalled. 3. The installation of the gate shall be well coordinated with the ground induction coil. The output end of the ground induction coil shall be twisted to the gate, and the shorter the distance, the better. After connection, the nest shall be sealed with dry cement; 4. The ground induction coil shall not be damaged during laying, and the joint shall be avoided as far as possible, otherwise the gate will fail to open and fall normally, and the gate will fail to fall automatically after passing the vehicle; 5. The parking lot gate system has adjusted the spring to torque balance according to the rod length before leaving the factory. If the gate rod is lengthened and cut according to the site conditions, the spring force should be adjusted to balance again, otherwise the motor will overheat and the reducer will be excessively worn.

II. The parking lot gate also needs maintenance during daily use: 1. Check once a month to see if the fasteners are loose and fall off. If this happens, fasten them in time. 2. Generally, the balance spring shall be checked after 30000 times of operation of the gate in the parking lot, and the balance adjustment shall be made in time. The spring is easy to deform and may change over time. 3. Properly lubricate the movable connecting accessories of the gate every 3 months, check the wear every 6 months, and replace the wear parts in time. 4. The parking lot gate shall be cleaned of dust and sundries on the surface of the box frequently to keep the gate clean and hygienic, which can give him a good impression and avoid the rust of the system body. 5. The remote control distance is too short. Tigerwong suggested to check whether the installation position of the host is covered by metal or whether the battery power is sufficient. 6. As the heart of the machine, the movement of the gate must be well maintained. Tigerwong recommends that the maintenance is generally once a month: cut off the power supply, clean the dust on the surface, carry out lubrication treatment, and check the fastening and wear of components.

If it is worn, replace it in time. Check whether there is a gap of more than 3mm between the positioning arm and the positioning disc. If so, replace it in time. The convenience and quickness brought to people by intelligent car parking system make people see the dawn on the parking road. The gate system is the guardian door god of the parking lot.It is necessary to spend some time on maintenance. The quality of the gate has a direct impact on travel. Only when the gate is good can it be more unblocked. Tigerwong parking equipment supplier has focused on parking equipment for many years! If you have any questions about the parking system, welcome to consult and communicate.