The Monitoring Image of Parking Lot System Cannot Be Displayed. Solution - Tigerwong

The standard intelligent car parking system is generally equipped with surveillance cameras to realize some functions, such as image comparison function and license plate recognition function, and strengthen the monitoring and management of vehicles in the parking lot. However, in the normal application process, the failure of monitoring image display and image comparison function without image comparison are common faults. Here we summarize these troubleshooting methods. Fault 1: the management computer does not have a monitoring image, but only displays a fixed image. There are two main reasons for this fault: one is the incorrect software setting, and the other is the problem of video capture card. The first reason is relatively simple to solve. You can set it correctly in the listening yard system. The specific methods are as follows: 1. Select the correct video card model in the system setting; 2. Turn on the lane image comparison function; 3. Check whether other application software of video card is enabled; It should be noted that the driver of the video card is best installed from the installation package provided by the parking lot system. It is best not to install the CD driver attached to the video card, which is also one of the reasons for the failure. The second reason is the solution. If the driver of the video card is not installed successfully or damaged, the above faults will also be caused. The way to solve this problem is to check whether the video card driver is installed and installed correctly in the device manager of the computer. It is best to reinstall the driver. If the computer does not detect the video card, it may be that the video card has poor contact with the PCI slot or has been damaged. You can remove the video card and check it with another computer to see if it is normal. Fault 2: there is no image comparison in the image comparison function. The cause of this kind of fault is generally caused by the wrong setting of the image saving path. The solution is to reset the image saving path. It should be noted that the image saving path should not use Chinese characters, full angle characters or other special characters; For path settings, please refer to: stand-alone version path D: photo ,; Network version path parkserver photo or 192.168.1.1 photo ; Well, let's introduce the processing method of intelligent car parking system unable to display the monitoring image. Thank you for reading.