The Gate of Parking Lot Is Very Important, and There Are Tricks for Daily Maintenance - Tigerwong Te

With the increasing number of cars and parking lots, the demand for the parking lot gate will become larger and larger. The gate plays a very important role in the parking lot system. Once the gate fails to work normally, the whole parking lot system will not operate normally. Therefore, the parking lot gate shall be maintained regularly, It can prolong the service life of the parking lot system. Next, let's take a look at some tips for maintaining the parking lot gate.

At present, there are many kinds of gates on the market, including straight bar gate, fence gate, curved bar gate, and now more popular advertising gate. Daily maintenance is very important. 1. Check whether the fasteners of the gate are loose and fall off once a month and fasten them in time. Loose screws can easily lead to improper lifting of the gate and other faults. 2. Regularly remove dust and sundries on the surface of the gate box to keep the gate surface clean. The cleaning of the surface can give people a good image and avoid the rust of the system body. 3. The manufacturer of tigerwong parking lot system recommends adding lubricating oil to all movable connecting accessories of the gate every three months to maintain good lubrication. Ask professional personnel to check the wear condition every 6 months and replace the worn parts in time. 4. Check the balance spring after the gate has been operated for 30000 times, and make balance adjustment in time.

The spring is easy to deform and may change over time, so pay attention. 5. Many of the license plate recognition opening gates on the market now, of course, some use remote controls. If the remote control distance is too short, the tigerwong parking lot system manufacturer recommends to check whether the installation position of the host is covered by metal objects or whether the battery power is sufficient. The remote control batteries generally use DC12V and 23a batteries, with a service life of one year. Pay attention to replace the batteries and do not get damp Wrestling and impact. Of course, there are some technical maintenance: 1. The maintenance of the gate circuit in the parking lot depends on the previous use of the gate to see whether there are problems in the electric control part.

If there are no problems, check whether the power supply is exposed, wrap it, sort out the wires, and replace the wires. Refer to the instructions to check the parameters of each part. If there is a problem, follow the steps to find the root of the problem and replace individual electronic components. 2. Maintenance of the internal movement of the parking lot gate the movement of the gate, as the heart of the machine, must be well maintained. The maintenance frequency recommended by the gate manufacturer is generally once a month: first open the upper cover, cut off the power supply, clean the surface dust, clean the transmission part first, and then add butter or high concentration engine oil for lubrication. Check whether the fasteners are loose, tighten the fasteners, and check the wear of vulnerable parts.

If it is found that the wear degree exceeds the specified parts, replace them in time. Check whether there is a gap of more than 3mm between the positioning arm and the positioning disc. If so, replace them in time. Add an appropriate amount of grease or oil in the solenoid valve core to make the solenoid valve move left and right to reduce resistance, Get lubrication, but don't add too much, otherwise it will backfire. As the goalkeeper of the first pass of the parking lot, the problem of the parking lot gate will affect all the parking procedures behind, and may also lead to the paralysis of the whole parking lot.

Therefore, daily maintenance is very important. Tigerwong parking equipment supplier has focused on parking equipment for many years! If you have any questions about the parking system, welcome to consult and communicate.