As an integral part of the parking lot system, the gate plays an important role in the parking lot. Improper use will not only cause after-sales problems, but also affect the service life of the gate. At present, there are many kinds of road gates on the market, including straight bar road gates, fence road gates, curved bar road gates, and now more popular advertising road gates. Firstly, these road gates are made of 304 stainless steel, which are rust resistant, firm and durable. However, it is recommended that the equipment purchaser should regularly clean their appearance, remove rust spots, and apply rust preventive oil regularly, So as not to damage the antirust effect of the surface. Secondly, the most important part of the gate is the movement, which is the heart of the gate, so it must be well maintained. Cut off the power supply to clean the surface dust, lubricate the transmission part, check whether the screws of the fastening part are loose, check the wear of easily worn parts, and replace those whose wear degree exceeds the specified requirements, Check whether there is a gap of more than 3mm between the positioning arm and the positioning disc. If so, replace it in time. Finally, the maintenance of the gate circuit part, check whether there are problems in the electric control part and whether the wires are aging, and check the parameters of each part with reference to the manual. If there is a problem, find the root of the problem and replace the electronic components. With the increasing number of cars, the demand for the parking lot gate becomes larger and larger. The gate plays a very important role in the parking lot system. Once the gate cannot work normally, the whole parking lot management system cannot operate normally. Therefore, regular maintenance and repair of the parking lot gate can prolong the service life of the parking lot system.
![Taigewang Technology Introduces You to the Correct Use of the Gate in the Parking Lot System_ Taigew 1]()