Precautions for Purchase and Application of Parking Lot Gate - Tigerwong Technology

The parking lot system consists of management server, entrance and exit control machine, entrance and exit gate, network switch, camera and other parts. During the operation of the whole parking lot system, the gate management system is the most important equipment, and the frequency is usually the most. If the gate cannot be used normally, the whole parking lot system may be paralyzed. This paper will briefly explain the three aspects of the gate direction, the lifting speed of the gate rod and the rod length in the early stage. 1. The direction of the brake rod shall be selected according to the actual needs of the parking lot, such as left to right (i.e. the box is installed on the left, the brake rod is facing the right, Fig. 1) or right to left (i.e. the box is installed on the right, the brake rod is facing the left, Fig. 2). According to the Chinese vehicle design, the driver is usually on the left of the vehicle, so the direction of the gate rod is generally left to right. However, when the road is wide and two road gates are required for on-site vehicle management, the right fixed left road gate shall be provided.

Fig. 1 and Fig. 2. Lifting speed of brake rod the lifting speed of brake rod is restricted by the length and weight of brake rod. The longer the length of brake rod, the heavier the weight, and the slower the lifting speed. Customers choose the gate lifting speed according to the width and height of the entrance and exit of the parking lot and the actual use of users. Tigerwong provides fast gate, high-speed servo gate, high-speed channel changing gate and ordinary gate. For example, the time of the landing rod of tigerwong octagonal Expressway gate can reach 0.3 0.8s, and the high-speed landing rod limits the carbon fiber rod with a max rod length of 2m; The lifting and lowering rod time of tigerwong frequency change gate is 0.6s/0.9s/1.2s, and the corresponding rod length is 2m / 2.5m/3m respectively. 3. Length of fence rod in addition to considering the actual situation of the project site to meet the needs of customers, it is also necessary to confirm with the manufacturer whether it can be provided.

Taking the underground garage as an example, if the height from the ground to the top is only 3 meters, and the single channel through which the vehicle passes needs at least 3 4 meters, if the use of straight rod is obviously not suitable, 90 degree curved rod or 180 degree curved rod must be considered. It is assumed that the project site needs 4 5m long fence rod, and the length of the fence rod provided by the manufacturer is usually 3.5 4.5m. During procurement, it should consider whether the manufacturer can provide it, or suggest the customer to replace it with the gate rod type (such as replacing it with a straight rod), or suggest the customer to change the site scheme (such as installing two opposite gates, and the length of the fence rod will be shortened accordingly). When purchasing parking lot gates, it's best to explain your site conditions and needs to the manufacturer. If you can take photos and mark the corresponding data information on site, professional parking lot system suppliers can give the best scheme according to your pictures and description, so as to avoid the loss caused by other information asymmetry. Tigerwong parking equipment supplier has focused on parking equipment for many years! If you have any questions about the parking system, welcome to consult and communicate.