Precautions for Maintenance of Expressway Gate - Face Recognition Gate

Reliable high-speed gate can effectively realize the automatic control of motor vehicle entrance and exit, and try to avoid vehicle pushing at the toll gate of high-speed road. The high-speed gate belongs to the mechanical loss product of constantly waving the gate rod, so it needs to be maintained regularly. The following mainly explains the precautions for the maintenance of Expressway gate? 1. Pay attention to external maintenance. At present, the affordable highway gates on the market are made of 304 stainless steel, with strong rust prevention and durability. Due to the particularity of this material, the cleaning frequency of Expressway gate can be determined as once a week. It is mainly aimed at the surface cleaning of the high-speed gate. The surface of the chassis can be polished with soft cloth or fossil powder and coated with antirust oil. Be sure not to touch the surface of the high-speed gate with your hands during a period of time just coated with antirust oil, so as not to affect the antirust effect of the surface. 2. Pay attention to the maintenance of the circuit part. Secondly, pay attention to the maintenance of the circuit part of the expressway gate. Maintenance personnel can check whether there are problems in the electric control part according to the previous use of the expressway gate. For example, check whether the power supply has external leakage. If it is found, wrap it immediately. The wire is aging and should be replaced immediately. The inspection of other parts can be carried out in strict accordance with the reference manual. The parameters of various parts should be carefully checked and compared to find out the root cause of the problem and solve it. 3. Pay attention to internal movement maintenance. As the core component of the high-speed gate, the movement of the high-speed gate must pay attention to daily maintenance. It is recommended to maintain it once a month. Firstly, cut off the power supply, and then clean the transmission part of the high-speed gate, and then carry out wheel sliding treatment with high concentration engine oil. Secondly, tighten the fasteners in turn. Then check whether lubricating oil needs to be added to the positioning wall and positioning disc of the expressway gate and the battery valve core. In short, the internal maintenance of the movement is very important. To sum up, pay attention to external maintenance, circuit maintenance and internal movement maintenance during the maintenance of Expressway gate. At the same time, the balance spring at the gate rod of the high-speed gate shall be adjusted in time after running for the specified times. At the same time, the remote control battery in the box of the expressway gate shall be replaced regularly to avoid moisture, falling and impact.