If the Hardware Equipment of the Parking Lot System Wants to Be Used for a Longer Time, It Needs_ Ta

Now more and more parking lots adopt parking lot system. The introduction of these advanced technologies not only solves the parking problems of car owners, but also greatly reduces the workload of parking lot managers. Of course, we can't only see the convenience it brings to people, but also need proper maintenance. How should parking lot managers maintain parking lot equipment? First, routine inspection shall be carried out once a month to carefully check whether the components of the fastening structure are loose and fall off. If this happens, it shall be fastened in time. The current parking lot gate generally needs to make balance adjustment in time after 40000 times of operation, mainly to check the balance spring, because the balance spring will deform over time, Timely observation and adjustment are required. Every four months or so, it is necessary to fill the movable connecting parts of the gate with an appropriate amount of lubricant, and check the wear of the parts every seven months. If there is damage, it needs to be replaced with good parts in time. Secondly, the parking lot gate should often clean the dust and sundries on the body surface. The license plate recognition camera should pay attention to the maintenance of photosensitive parts and the cleaning of lens dust, because keeping the parking lot equipment clean and hygienic can not only bring a good impression to customers, but also prevent the body from rusting. If the remote control distance of the gateway is short, it is recommended to check whether the installation position of the host is covered by metal or whether the battery power is sufficient. As the heart of the machine, the movement of the gate must be well maintained. The suggestion is that the maintenance is generally once a month. Colleagues check whether there is a gap of more than 3mm between the positioning arm and the positioning plate. If necessary, replace it in time.