How to Select Intelligent Gate of Parking Lot_ Taigewang Technology

The selection of the gate of the intelligent parking lot system is nothing more than a combination of the four points of the gate take-off and landing speed, gate rod, mechanical transmission mode and electrical performance. Let's introduce it in detail below. 1、 The take-off and landing speed of intelligent gate is divided into high-speed, medium speed and low-speed. The specific applications are as follows: 1. The take-off and landing time of high-speed gate is 1.5 seconds, which is mostly used for road management, such as high-speed toll station; 2. The medium speed take-off and landing time is 3 seconds, which is mostly used in factories, communities, enterprises, parking lots, etc; 3. Low speed take-off and landing time is 6 seconds, which is not different from medium speed. 2、 There are three types of gate poles: straight pole, curved pole and fence pole. The details are as follows: there are two kinds of straight rods: rubber strip straight rod and telescopic straight rod, which can be selected according to needs; The height of the roof and the width of the road surface shall be determined before the selection of the curved bar, and then the length of the main bar and the auxiliary bar shall be calculated & lsquo; The fence pole has round pole fence and square pole fence, which can be selected according to specific needs. 3、 Mechanical transmission mode there are three mechanical transmission modes of the gate: belt transmission, hydraulic transmission and Mechatronics transmission. Belt drive: the advantage is low cost, but the disadvantage is that the belt is easy to stretch and wear, the motor runs loudly, and the transmission balance is not good. It should be maintained frequently. Hydraulic transmission: it has the advantages of simple structure, fast transmission speed, low noise and good performance. It is mostly used for highway. The disadvantage is high cost and high maintenance cost. Mechatronics transmission: the motor and reduction mechanism are integrated. The motor can be selected according to the rod length and start-up time. There is no need to adjust the reduction mechanism. It is easier to deal with power failure. You can use the key. It has the advantages of simple operation, low noise, moderate cost and convenient maintenance. 4、 Electrical performance here, we should select the control system according to the specific security inspection requirements. The security inspection functions of the general control system include ground sensing, infrared, pressure wave, etc. Well, that's all for the selection of intelligent parking lot gates. I hope it will be helpful to you. Thank you for reading.