How to Correctly Install the Parking Lot License Plate Recognition System?

In the orderly urban management, the parking lot license plate recognition system plays an important key role. It can not only improve the safety management, but also speed up the access speed of vehicles at the door to avoid traffic congestion. Then, how to correctly install the parking lot license plate recognition system after the company specializing in the parking lot license plate recognition system buys back the recognition system? 1. The camera equipment shall be installed on the side. Considering that the vehicle can enter and exit conveniently and there is no collision and scratch when entering and leaving, the camera equipment in the parking lot license plate recognition system shall be installed on the side, and it shall be installed from a top view angle, that is, the camera equipment shall be installed on a pole with a height of 1.2 meters, In this way, the vehicle can be photographed completely. 2. The distance between the central axis of the camera equipment and the ground induction coil shall be appropriate, so that the camera equipment triggers the shooting command from the ground induction coil. Therefore, when installing the parking lot license plate recognition system, ensure that the camera equipment is installed at a position three to four meters away from the central axis of the ground induction coil, because once the vehicle drives into the induction range of the ground induction coil, it will trigger the shooting command of the system, At this time, the vehicle will continue to move forward. When driving to the central axis, the camera just starts shooting, so this position is the focus of the camera. 3. The position of the fill light shall be higher than that of the camera equipment. In order to clean the vehicle at night and in rainy weather, the fill light shall be installed at the same time when installing the parking lot license plate recognition system. The fill light shall be installed on the same pole as the camera equipment and above the camera equipment. After installation, commissioning shall be done, Ensure that good lighting effect can be provided. After purchasing a high-quality and reliable license plate recognition system from a parking lot license plate recognition system company with good brand and reputation, the parking lot license plate recognition system should be correctly installed before it can be used, because if the installation is unreasonable, it will lead to the inability to take clear vehicle photos, resulting in poor recognition effect of the parking lot license plate recognition system.