Exit Workflow of Intelligent Parking Lot System_ Taigewang Technology

Last time we introduced the work flow of the entrance of taigewang technology intelligent parking lot system. Today we are talking about the work flow of the exit of the parking lot. The flow chart is as follows: before the introduction, we first explain that the parking lot system is composed of card reader, automatic gate, toll display screen, vehicle detection equipment, walkie talkie and surveillance camera. Let's explain it in detail below. There are also two kinds of temporary cards and fixed cards. Let's talk about temporary cards first. 1. Temporary card when the vehicle drives into the exit work area, the display screen of the parking lot controller will display the card reading request, the driver swipes the card in the panel sensing area, and the ticket issuing machine in the parking lot detects that it is a temporary card and will not open the gate. The parking lot management system will check the vehicle information. If the card is valid, it will pay the fee according to the conditions set by the system, such as parking by time or time. The words please pay * * will be displayed on the screen of the ticket issuing machine to prompt the payment amount. The driver will give the temporary card and fee to the security guard, and the security guard will give the invoice to the driver. After the payment is completed, the security guard will confirm on the computer, open the road gate, the display shows bon voyage, turn on the surveillance camera at the same time, shoot and compare the vehicles, store the vehicle pictures in the management system and record the exit time of the vehicles. When the driver drives the vehicle away, there is no vehicle in the vehicle detector lane, and the gate falls automatically. So far, the exit process is over. 2. Fixed card fixed card is relatively simple. When the vehicle drives into the exit work area, the display screen of the parking lot control machine will display the card reading request. The driver swipes the card in the panel sensing area, and the system will check the vehicle information. If the card is valid, the card will be read and paid directly according to the conditions set by the system. After the payment is completed, the road gate will be opened, the display screen will show bon voyage, and the surveillance camera will be turned on at the same time to photograph and compare the vehicles, store the vehicle pictures in the management system and record the vehicle exit time. When the driver drives the vehicle away, there is no vehicle in the vehicle detector lane, and the gate falls automatically. So far, the exit process is over. The above is the export workflow of the intelligent parking lot system. Thank you for reading. If there are deficiencies, please correct them.