Composition and Function Analysis of Parking Lot Gate_ Taigewang Technology

With the development of economy and the progress of cities, motor vehicles can be seen everywhere, and the problem of parking also follows. With the increase of demand, people have higher and higher requirements for intelligent parking lot system. The traffic speed of vehicles should be fast, the access should be smooth, and the parking lot system should be beautiful. As the facade part of the parking lot system, we should have higher requirements for the gate. Now let's learn about the composition and application of the road gate of Shenzhen taigewang parking lot. 1. Chassis: the chassis of the parking lot gate shall be solid and firm, able to prevent rain and splash water, and the shell can be opened and removed with a special key for convenient operation. A set of shell removal device needs to be specially developed to prevent external damage, bright color and strong alarm function. 2. Motor: the electric power of the gate motor in the parking lot shall be safe and fast, and the special AC and DC motors for the fast telescopic door shall be specially customized, which have the opening, closing and stopping control functions, as well as the motor speed output function, so as to facilitate the control system to detect and monitor the operation of the motor. 3. Clutch: the clutch is divided into two working modes: electric and manual. In case of power failure, we can easily lift the lever manually and use the rocker to control the rise and fall of the brake lever. The staff do not need special training, which is simple and fast. 4. Transmission device: four link balanced design, the gate operates light, stable and low noise. At the same time, it prevents artificial rod lifting and pressing, and skillfully unloads the external force to the chassis through the transmission mechanism. 5. Electronic control: taigewang road gate uses photoelectric switch instead of travel switch as positioning control, and the whole circuit adopts contactless control. The gateway has a variety of interface control modes: button switch, infrared or wireless remote control, computer monitoring, weak current to control strong current, built-in single chip microcomputer processing chip, with intelligent logic control and processing function. 6. Access to power supply: the power supply voltage of taigewang road gate is AC220V, which is convenient for life. At the same time, it has lightning protection settings, which is safe and convenient. 7. Lift off and landing time of brake rod: 6S, 3S and 1s can be selected. It can be reasonably set according to the conditions of the parking lot to meet the requirements of different parking lots and better solve the problem of congestion. 8. Installation: the parking lot gate is installed at the entrance and exit of the parking lot, about 3M away from the control machine. 9. Barrier anti-collision function: barrier collision is a common phenomenon in the parking lot, which brings a lot of economic losses to both sides. Therefore, it is essential to improve the barrier's own anti-collision performance. During the design and installation of taigewang road gate, a deceleration device is set at the inlet and outlet, and the anti-collision ability of the road gate rod is improved. Through the above description, I believe you have a general understanding of the parking lot gate. It is necessary to reasonably select the parking lot management system. A good parking lot system will make life more convenient, unblocked and safer. Of course, with the progress of society and the development of science, the function of the parking lot gate will be more and more comprehensive and adapt to life. I believe that King Taige will be around you in the near future, looking forward to the future and facing success together.