Classification and Function Introduction of Parking Lot Gate - Tigerwong

Although the gate is only a small part of the parking lot system, it is the most important part of the parking lot system. Therefore, when purchasing the parking lot gate, we must make a decision according to the site conditions and use environment. Here is a brief introduction about some types and functions of the parking lot gate by Shen tigerwong. The gate is mainly composed of motor, reducer, transmission mechanism, balance device, chassis, brake rod support, brake rod, etc. According to the types of railings, parking lot gates can be divided into curved bar gates, straight bar gates and fence gates; According to the time of the landing lever, we can roughly divide it into fast track gate, medium speed track gate and slow track gate; According to the installation direction, it can be divided into left-hand gate, right-hand gate, etc. The gate in the parking lot system mainly consists of the following functions: first, the manual button can be used for lifting, lowering and stopping, and the wireless remote control can be used for lifting, lowering and stopping, as well as locking and unlocking the manual button; 2、 In case of power failure, the gate can be unlocked automatically, and the pole can be lifted manually after power failure; 3、 It has self inspection mode convenient for maintenance and commissioning. Now, with the development of technology and the increasing number of vehicles, the demand for the gate is also increasing, and the performance requirements of the gate are also higher and higher. For example, the gate movement is integrated, and the pole can be raised manually and quickly after power failure. The most important thing is that the gate must have multiple anti smashing functions because of the frequent car smashing accidents in the parking lot recently. At present, many users do not understand some functions of the gate, so they blindly try to improve the traffic speed of vehicles in the parking lot and require suppliers to install the expressway gate. The installation of the expressway gate depends on the length of the gate rod and the on-site environment. Therefore, we can not only pursue the traffic speed of vehicles and ignore some safety problems.