Access Control – TGW-TM81F

1. Face + Card + Fingerprinttripleverification, supports single or combined verification, and flexibly adapts to different security level requirements.
2. High-precision biometrics, face recognition quick comparison in 0.3 seconds, liveness detection to prevent photo/video spoofing.
3. Fingerprint recognition with semiconductor sensor, rejection rate ≤ 0.01%, anti-fake fingerprint film.
4. Large-capacity storage, support 50,000+ face and card database,2000+ fingerprintdatabase, meet the needs of large venues.

1. Sensor-activated wake-up: When a person enters the recognition area, the sensor automatically activates the device, and the camera begins operation.
2. Liveness detection: Dynamically captures faces and analyzes micro-expressions or 3D contours to determine liveness, ensuring it is a real person.
3. Feature comparison: Extracts facial feature codes and performs rapid matching and verification against the system’s pre-stored facial database.
4. Command execution: If verification is successful, an opening signal is sent to the gate with a success message; if verification fails, the gate remains closed and a warning is displayed.
5. Recording and archiving: Each recognition result (including captured images) is recorded and saved, and the device then resets to standby mode.

1. Does it support mask recognition?

Yes, it supports mask recognition, and the recognition sensitivity can be adjusted.

2. How fast is the recognition speed?

Average recognition time ≤0.3 seconds, millisecond response.

3. Is fingerprint recognition effective for dry/wet hands?

Using a semiconductor dynamic fingerprint sensor, it can adapt to dry, wet, and shallow fingerprints, with a recognition rate of up to 99.5%.

4. How many faces,card and fingerprint data does it support at most?

Faces/Cards: 10,000+ (expandable to 50,000); Fingerprints: 2000+.

5. Does it support liveness detection?

Supports 3D liveness detection, which can effectively block attacks such as photos, videos, and screen reshoots.

6. What are the installation methods?

Supports wall-mounted and gate embedded installation, and can also be used with a bracket.

7. Does it need to be connected to the Internet?

Supports offline recognition, and can also be connected to the Internet for data synchronization and management.

8. Can the three identification methods be used at the same time?

Yes, they support free combination. For example, it can be set to “face + fingerprint” or “card + fingerprint” dual authentication to meet the security needs of different scenarios.

9. How is the power consumption of the device?

Low power consumption design, standby power <5W, 24-hour stable operation.

10. What is the recognition distance and height range?

The best recognition distance is 0.3-1.5 meters, and the height is 1.2-2.2 meters

11. Does it support temporary visitor registration?

Yes, temporary access permissions can be set (such as valid for 1 hour/1 day).